plasma spray
英 [ˈplæzmə spreɪ]
美 [ˈplæzmə spreɪ]
等离子体喷涂
双语例句
- Tribological Performance of TiC/ Fe Coatings Fabricated by Reactive Plasma Spray
反应等离子喷涂TiC/Fe涂层的摩擦磨损性能研究 - Oxidation Behavior of Iron Particles during Plasma Spray
铁颗粒在等离子喷涂过程中的氧化行为 - Application of Plasma Spray Technique in Calender Roll
等离子喷涂技术在纸机压光辊上的应用 - Preparation and performance analysis on wear-resistance coating of plasma spray welding
等离子喷焊耐磨涂层制备及性能分析 - This paper introduces the new development of micro-structural, mechanical property, coating surface treatment and physical property of Plasma spray coating in recent years at home and abroad.
本文介绍了等离子喷涂涂层的微观结构，力学性能，涂层表面处理及物理性能等国内外最新的研究进展。 - Quality Evaluation of Plasma Spray Coating Based on Leaky Rayleigh Wave
基于泄漏瑞利波的等离子喷涂涂层质量评价 - The stainless steel plungers and bushes with plasma spray chrome oxide coating provide the maximum resistance to corrosion and abrasion.
不锈钢柱塞和等离子喷涂铬氧化物涂层灌木丛提供最大的抗腐蚀性和耐磨性。 - Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。 - According to operating mode of the cathode in the thruster, the design of the cathode structure, including selection of the materials and the technology of the plasma spray, were described.
根据阴极在推进器中工作方式，对阴极结构设计进行了描述，包括材料选择和等离子体喷涂工艺制造。 - Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings
等离子喷焊镍基合金碳化钨复合涂层 - A DC plasma spray was studied with Ar-H_2 gas mixture and Mo particles.
喷涂系统采用氩-氢混合气的直流电等离子体，粒子材料是钼。 - A nanostructured zirconia coating was prepared by plasma spray sol process.
采用等离子喷涂溶胶工艺制备了氧化锆纳米涂层。 - The Study of Wear Resistance of Tungsten/ Nickel-Base Alloy Composite Coatings; Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings
WC/Ni基合金复合涂层耐磨性研究等离子喷焊镍基合金碳化钨复合涂层 - The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。 - The stainless steel rapid mold is manufactured by RP and plasma spray technology.
用基于快速原型制模技术（RP）的等离子喷涂制模技术制造不锈钢模具。 - Hydroxyapatite coating was applied to the surface of titanium alloy employing plasma spray technology.
使用等离子喷涂技术，在钛合金表面制备了羟基磷灰石涂层。 - Phase structure, hardness, wear morphology and characteristics of plasma spray coating of WC-17% Co are studied.
研究了等离子喷涂WC-17%Co涂层的显微结构、相组成、平均硬度和磨损形貌、耐磨性能。 - The mixed titanium+ hydroxyapatite ( HA) powder was sprayed into water using a plasma spray equipment.
利用等离子喷涂设备将Ti与羟基磷灰石（HA）的混合粉末喷射入水，采用扫描电子显微镜和X射线衍射仪研究了Ti+HA入水颗粒的形态和相组成。 - The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。 - A direct current plasma spray gun was designed in which separation sections were set between anode and cathode to restrict the large-scale diffluence of arc.
在此基础上，设计了一种直流等离子体喷枪，采用在阳极和阴极中间设置隔离段的方法来限制电弧的大尺度分流。 - Some kinds of domestic and foreign representative plasma spray equipment and its new development trend are introduced.
介绍了几种国内外具有代表性的等离子喷涂设备及其最新发展动态。 - The feeding system of liquid feedstock was equipped on the bases of general high energy plasma spray equipment.
在采用常规高能等离子喷涂设备的基础上，配备了液料送进系统。 - The equipment and atomizing principle of the Centrifugal Atomization Plasma Spray process ( CAPS) were introduced, and the formation of particles was analysed.
介绍了离心雾化等离子喷涂技术的工作原理和喷涂粒子的雾化机理，分析了雾化粒子的形成过程。 - Using diaspore as raw material, alumina ceramic coating was prepared by plasma spray plus laser remelting technique.
以一水硬铝石为原料，利用等离子喷涂激光重熔技术制备了氧化铝陶瓷涂层。 - The Development and present status of plasma spray welding will be presented in here.
本文介绍了等离子弧热喷焊技术的发展现状和前景展望。 - The feasibility of reduced-friction coating against U-Nb alloy made by plasma spray technique was investigated.
探讨了用等离子体喷涂方法制备改善与U-Nb合金之间摩擦性能的减摩层的可行性。 - Titanium coatings have been deposited onto 317L stainless steel plate by low pressure plasma spray ( LPPS) process.
采用低压等离子喷涂工艺，在317L不锈钢质接骨板上喷涂了钛涂层，制备出钛涂层的接骨板.通过动物的植入实验，研究了这种接骨板的生物相容性； - The Mo/ Ni composite coatings were sprayed by plasma spray welding.
采用等离子弧喷焊法制备了Mo/Ni60复合涂层。 - The basic idea of the reactive plasma spray ( RPS) was presented.
阐述了反应等离子喷涂（RPS）方法的基本思想。 - Spraying experiment is made by plasma spray technique.
采用等离子喷涂工艺进行了喷涂试验。